Resumen
A gradient of plasma polymerization of pyrrole was generated to model a chemoattractant surface; it was obtained by changing the polymerization time to manipulate the thickness and the deposited layer. The polymerization was generated with a power of 30W on a cylindrical vacuum reactor, the coverslip was polymerized covered by a cavity with a surface exposed of 0.7 cm every 35 min., the cells seeded were liver stellate cells (Ito); it was evaluated against a coverslip with continuous plasma polymerization of pyrrole (Ppy). The results show similar protein secretions, but cells proliferation was selective in the surface gradient regions.Citas
R. I. Freshney, Culture of Animal Cells, a Manual of Basic Technique, Chapter 12, Subculture and Cell Lines 6th Ed. (Hoboken NJ, John Wiley & Sons, 2011) p. 187–206
M. Bokhari, R. Carnachan, N. Cameron and S. PrzyborskiJ. Anat. 211, 567 (2007).
M Geetha.,A.K.Singh, R.Asokamani,A.K. Gogia, Progress in Materials Science 54, 397 (2009)
R.P. Lanza, R. Langer, J. Vacanti, Principles of tissue engineering.(Ed.Academic Press. 2000) p.215-289
S. R.Moosvi, R.M. Day,ActaBiomaterialia, 5, 76 (2009).
Y.Shoufeng, L. Kah-Fai, D. Zhaohui, C. Chee-Kai, Tissue Engineering, 7, 679 (2001).
G. Cruz , R.Mondragon-Lozano, A.Diaz-Ruiz, J. Manjarrez, R. Olayo, H. Salgado-Ceballos, M.G. Olayo, J. Morales Journal of Materials Science:Materials in Medicine. 23, 2583 (2012).
Cruz G.J, Morales J., Olayo R. Thin solid Films 342, 119(1999).
H. Biederman,,D. Slavinska,Surface and CoatingsTechnology 125, 371 (2000)
O.Ramirez-Fernandez, R. Godinez, J. Morales, L. Gómez- Quiroz, M.C. Gutiérrez-Ruiz, E. Zuñiga-Aguilar, R. Olayo, Revista Mexicana de IngenieriaBiomedica 33, 2 (2012).
Harding F. “Assessing embryonic stem cell response to surface chemistry using plasma polymer gradients” ActaBiomaterialia 8, 1739 (2012).
I. Gancarz, G. Pozniak, M. Bryjak, W. Tylus, Eur. Polym. J. 38, 1937 (2002).
G. Pozniak, I. Gancarz, M. Bryjak, W. Tylus, Desalination 146, 293 (2002).
F. Truica-Marasescu, M.R. Wertheimer, Plasma Process. Polym. 5, 44 (2008).
J. Xu, K.K. Gleason, Chem. Mater. 22, 1732 (2010).
J.L. Baher, J. Yang, D.V. Kosynkin, M.J. Bronikowski, R.E. Smalley, J.M. Tour, J. Am.Chem. Soc. 123, 6536 (2001).
D. Mangindaan, W. Kuo, C. Chang, S. Wang, H.Liu, M. Wang, Surface & Coatings Technology 206, 1299 (2011).
L.-Q. Chu, W. Knoll, R. Förch, Langmuir 22, 5548 (2006).
A.J. Choudhury, J. Chutia, H. Kakati, S.A. Barve, A.R. Pal, N.S. Sarma, D. Chowdhury,D.S. Patil, Vacuum 84, 1327 (2010).
L. Denis, D. Thiry, D. Cossement, P. Gerbaux, F. Brusciotti, I. Van De Keere, V.Goossens, H. Terryn, M. Hecq, R. Snyders, Prog. Org. Coat. 70, 134 (2011).
D. Mangindaan, W.-H. Kuo, Y.-L.Wang, M.-J. Wang, (Plasma Process. Polym. San Diago CA, pp. 7754 2010).
A. Choukourov, H. Biederman, I. Kholodkov, D. Slavinska,M. Trchova, A. Hollander, J.Appl. Polym. Sci. 92, 979 (2004).
Xia L., Xiupeng W., Dannong H. and Jianlin S., J. Mater. Chem., 18, 4103 (2008).