Coatings by plasmas of pyrrole on nitinol and stainless steel substrates
Vol. 25 Núm. 3 (2012), Artículos de Investigación
Vol. 25 Núm. 3 (2012)

Coatings by plasmas of pyrrole on nitinol and stainless steel substrates

Artículos de Investigación
Publicado 2012-09-15
C. De Jesús
Departamento de Física, Instituto Nacional de Investigaciones Nucleares. Instituto Tecnológico de Toluca
G. J. Cruz
Departamento de Física, Instituto Nacional de Investigaciones Nucleares
L. M. Gómez
Departamento de Física, Instituto Nacional de Investigaciones Nucleares. Posgrado en Ciencia de Materiales, Facultad de Química, Universidad Autónoma del Estado de México
O. G. López García
Departamento de Física, Instituto Nacional de Investigaciones Nucleares
G. García Rosales
Instituto Tecnológico de Toluca
A. Ramírez Santiago
Departamento de Sistemas Biológicos, Universidad Autónoma Metropolitana Xochimilco
L. C. Ríos
Departamento de Neuroquímica, Instituto Nacional de Neurología y Neurocirugía
PDF (English)

Cómo citar

De Jesús, C., Cruz, G. J., Gómez, L. M., López García, O. G., García Rosales, G., Ramírez Santiago, A., & Ríos, L. C. (2012). Coatings by plasmas of pyrrole on nitinol and stainless steel substrates. Superficies Y Vacío, 25(3), 157-160. Recuperado a partir de https://superficiesyvacio.smctsm.org.mx/index.php/SyV/article/view/197
ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver

Descargar cita

Endnote/Zotero/Mendeley (RIS) BibTeX

Resumen

Plasma polypyrrole was synthesized on stainless steel and Nitinol (Ni-Ti alloy) substrates in order to obtain polymer-metal compounds with high adhesion. The work has the objective to cover metal surfaces with polymers to reduce the contact of metallic surfaces with biological tissues in human body implants. The metal samples were subjected to RF glow discharges with water vapor and argon to clean, oxidize and erode before the polymer coatings. After that, the synthesis of polymers was carried out by glow discharges during 10 min at 13.56 MHz, 10-1 mbar and 20 W. The results showed that the coating is carried out in consecutive thin layers with the morphology of the metal at the interface. The coated samples were immersed in phosphate solutions (PBS) pH = 7.4 to simulate the conditions of salt concentration in human arteries and veins. The PPy coated metal substrates have rough morphology with resistance to PBS solutions. However, Nitinol samples needed Ar besides water discharges to clean, oxidize and erode.

PDF (English)

Citas

. J.C. Palacios, G.J. Cruz, M.G. Olayo, J.A. Chávez-Carvayar. Surface and Coatings Technology. 203, 3032 (2009).

. R.S. Langer, N.A. Peppas. Biomaterials, 1, 63 (2002).

. G.J. Cruz, J.C. Palacios, M.G. Olayo, J. Morales, R. Olayo. Journal of Applied Polymer Science. 93, 1031 (2004).

. E. Gallino, S. Massey, M. Tatoulian, D. Mantovani. Surface & Coatings Technology. 205, 2461 (2010).

. Z. Yang, J. Wang, R. Luo, M. F. Maitz, F. Ping, H. Sun, N. Huang. Biomaterials. 31, 2072 (2010).

. R. Bakhshi, A. Darbyshire, J.E. Evans, Z. You, J. Lu, A.M. Seifalian. Colloids Surf B Biointerfaces. 86, 93 (2011).

. R. Olayo, C. Rios, H. Salgado, G.J. Cruz, J. Morales, M.G. Olayo, M. Alcaraz, L. Alvarez, R. Lozano, C. Morales, A. Diaz, Journal of Materials Science: Materials in Medicine, 19, 817 (2008).

. P.M. George, A.W. Lyckman, D.A. LaVan, A. Hegde, Y. Leung, R. Avasare, C. Testa, P.M. Alexander, R. Langer, M. Sur. Biomaterials. 26, 3511 (2005)

. T.F. Otero, M.T. Cortes. Adv. Mater. 15, 279 (2003)

. X. Cui, J. Wiler, M. Dzaman, R.A. Altschuler, D.C.Martin. Biomaterials. 24, 777 (2003).