On the properties and resistance to abrasive wear of surface-modified Ti6Al4V alloy by laser shock processing
Vol. 27 Núm. 2 (2014), Artículos de Investigación
Vol. 27 Núm. 2 (2014)

On the properties and resistance to abrasive wear of surface-modified Ti6Al4V alloy by laser shock processing

Artículos de Investigación
Publicado 2014-06-15
J. Chávez
Departamento de Ingeniería de Proyectos, Universidad de Guadalajara
E. Rodríguez
Departamento de Ingeniería de Proyectos, Universidad de Guadalajara
M. Flores
Departamento de Ingeniería de Proyectos, Universidad de Guadalajara
J. Ibarra Montalvo
Departamento de Ingeniería de Proyectos, Universidad de Guadalajara
O. Jiménez
Departamento de Ingeniería de Proyectos, Universidad de Guadalajara
G. Gómez Rosas
Departamento de Física Centro Universitario de Ciencias Exactas e Ingenierías
PDF (English)

Cómo citar

Chávez, J., Rodríguez, E., Flores, M., Ibarra Montalvo, J., Jiménez, O., & Gómez Rosas, G. (2014). On the properties and resistance to abrasive wear of surface-modified Ti6Al4V alloy by laser shock processing. Superficies Y Vacío, 27(2), 54-60. Recuperado a partir de https://superficiesyvacio.smctsm.org.mx/index.php/SyV/article/view/136
ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver

Descargar cita

Endnote/Zotero/Mendeley (RIS) BibTeX

Resumen

The application of traditional surface modification techniques to improve mechanical properties of a wide range of materials has been used for at least three decades with important results. More recently, newer and innovative techniques such as Laser Shock Processing (LSP) have gained popularity due to the benefits offered. In this work, Ti6Al4V alloy was treated under several conditions of laser density and wavelength during the treatment. The roughness of the samples before and after treatment was measured by perfilometry. The resultant surface roughness average (Ra) is in the range for biomedical implants. The microhardness values were taken from the sample cross-section showing no increment after being treated with LSP. X-ray diffraction (XRD) was used for phase identification and possible changes in the lattice parameters. The abrasive wear resistance was evaluated by means of ball cratering tests, the wear volume was assessed measuring wear scars using profilometry from which the wear rate was calculated. Samples treated with LSP were in some cases more susceptible to abrasive wear that the untreated material.
PDF (English)

Citas

M. Niinomi, Science and Technology of Advanced Materials 4, 445 (2003).

F. Torregrosa, L. Barrallier, L. Roux, Thin Solid Films 266, 245 (1995).

J.K. M. Rozmus, M. Blicharski, J. M, Archives of Metallurgy and Materials 54, 665 (2009).

M. Rozmus-Górnikowska, Acta Physica Polonica A 117, 808 (2010).

V.F. Niehoff Schulze H., Metallurgical 11, 183 (2005).

Y.W. Y. Fan, S. Vukelic, and Y.L. Yao, Journal of Applied Physics 98, 104904 (2005).

J.P. Chu, J.M. Rigsbee, G. Banaś, H.E. Elsayed-Ali, Materials Science and Engineering A 260, 260 (1999).

I.Y. Khalfallah, M.N. Rahoma, J.H. Abboud, K.Y. Benyounis, Optics & Laser Technology 43, 806 (2011).

E. Chikarakara, S. Naher, D. Brabazon, Appl. Phys. A 101, 367 (2010).

R.R. Iva Milinkovi, Karlo T. Rai, Zoran Aleksi, Vojkan Lazi, Aleksandar Todorovi, Dragoslav Stamenkovi, MTAEC9 46, 251 (2012).

M.M. Shalabi, A. Gortemaker, M.A.V.t. Hof, J.A. Jansen, N.H.J. Creugers, Journal of Dental Research 85, 496 (2006).

M.G. Gee, A. Gant, I. Hutchings, R. Bethke, K. Schiffman, K. Van Acker, S. Poulat, Y. Gachon, J. von Stebut, Wear 255, 1 (2003).

R.I. Trezona, D.N. Allsopp, I.M. Hutchings, Wear 225, 205 (1999).

C. Leroy, K.I. Schiffmann, K. van Acker, J. von Stebut, Surface and Coatings Technology 200, 153 (2005).

A.S.f. Metals, ASM handbook: Friction, lubrication, and wear technology, 1992.

I.M. Hutchings, Tribology. Friction and wear of engineering materials, (London, 2003).

G.W. Stachowiak, A.W. Batchelor, 8 - Boundary and Extreme Pressure Lubrication, Engineering Tribology, (Ed. Butterworth-Heinemann, Burlington, 2006).

E.d.l.H. M. Flores, D.A. Egidi, R. Ruelas, E. Rodríguez, A. Bautista, P. Corengia., CONAMET SAM 1 (2008).

A. Wennerberg, C. Hallgren, C. Johansson, S. Danelli, Clinical Oral Implants Research 9, 11 (1998).

E. Maawad, Y. Sano, L. Wagner, H.G. Brokmeier, C. Genzel, Materials Science and Engineering A 536, 82 (2012).

J.Z. Lu, K.Y. Luo, F.Z. Dai, J.W. Zhong, L.Z. Xu, C.J. Yang, L. Zhang, Q.W. Wang, J.S. Zhong, D.K. Yang, Y.K. Zhang, Materials Science and Engineering A 536, 57 (2012).

E. Maawad, H.G. Brokmeier, L. Wagner, Y. Sano, C. Genzel, Surface and Coatings Technology 205, 3644 (2011).

S.L.R. da Silva, L.O. Kerber, L. Amaral, C.A. dos Santos, Surface and Coatings Technology 116, 342 (1999).

P.C. Peyre, C.; Forget, P.; Beranger, G.; Lemaitre, C.; Stuart, D. Journal of Materials Science 42, 6866 (2007)

J.Z. Lu, L. Zhang, A.X. Feng, Y.F. Jiang, G.G. Cheng, Materials & Design 30, 3673 (2009).

Y.B. Guo, R. Caslaru, Journal of Materials Processing Technology. 211, 729 (2011).

G.M. lL. Bengochea, J. Insausti, A. Lucaioli, L. Iurma, CONAMET. 8, 711 (2003).

Y. Zhang, J. You, J. Lu, C. Cui, Y. Jiang, X. Ren, Surface and Coatings Technology 204, 3947(2010).

R.C. Cozza, J.D.B. de Mello, D.K. Tanaka, R.M. Souza, Wear 263, 111 (2007).

R.C. Cozza, D.K. Tanaka, R.M. Souza, Wear 267, 61 (2009).

K. Adachi, I.M. Hutchings, Wear 255, 23 (2003).

R. Câmara Cozza, Tribology International 57, 266(2013).

F.J.G. Silva, R.B. Casais, R.P. Martinho, A.P.M. Baptista, Wear 271, 2632 (2011).